Glossary

Depth of field and background blur

Depth of field is the slice of the scene that looks sharp, in front of and behind the point of focus. Three things change it: the aperture, the distance from the subject and the focal length.

1Simulator

Blur the background

Change the aperture, distance and focal length: from 3 to 20 metres. The further back you go, the more of me fits in the photo. The diagram under the photo shows where the sharp zone starts and ends. Try the APS-C sensor too.

In real life

A black kitten resting on three nectarines, with the background completely blurred. Back to Simulator 1
f/1.41/200ISO 10085 mmNikon D850

Palmanova At f/1.4 the sharp zone is razor thin: the kitten stays in focus and everything else melts away.

85 mm f/1.4

The levers of background blur

1 Simulator Wide aperture (f/1.8, f/2.8): a thin sharp zone. Closer to the subject: an even thinner sharp zone. Longer focal length: the background more magnified and more blurred.

There’s a fourth lever that’s often forgotten: the distance between subject and background. If the person is leaning against a wall, the wall stays almost sharp even at f/1.8. Move them a few metres away from it and the background melts.

The sensor matters too: on APS-C, with the same framing, the background comes out a little less blurred. You’ll find it explained in lesson 12, and in the simulator you can try it with the APS-C button.

Key points

  • For a very blurred background: wide aperture, get closer to the subject and move the background further away.
  • At normal distances the sharp zone extends roughly one third in front of and two thirds behind the point of focus.
  • To get everything sharp, from the foreground to the horizon: a narrow aperture (f/8–f/11) and a short focal length.

Try it yourself

Photograph an object on a table with the background far away. Shoot wide open and at f/11, then halve your distance and take the two shots again. Compare the four backgrounds.

Post the result and tag me @enrico.marega, or send it to me by DM: I’d love to see how you tackled it.

Quick check

Which combination blurs the background the most?
Portrait at f/1.8 with the person leaning against a wall: the wall is still sharp. Why?