Glossary

Flash: main light, fill and sync

A flash is an extremely powerful and extremely short burst of light: it lasts about a thousandth of a second, and much less at reduced power. It’s used in two ways: as the main light, when there isn’t enough light, and as fill light, when there is light but it comes from the wrong side and leaves the face in shadow. To use it well you only need three ideas: flash light falls off quickly with distance, flash is controlled differently from ambient light, and every camera has its own sync speed.

Two lights in the same photo

When you shoot with flash, two exposures add up in the same photo. The ambient light (the sky, the street lamps, the windows) depends on shutter speed, aperture and ISO, as always. The flash burst, on the other hand, is so short that the shutter speed doesn’t change it: its light depends on the flash power, the distance from the subject, the aperture and the ISO.

2 Simulator Hence the practical rule: with the shutter speed you decide how bright the background is, with the aperture or the power how bright the subject is.

1Simulator

Main light: light falls off with distance

At night the flash is the only light. Move further away with the flash on the camera: every time the distance doubles, only a quarter of the light reaches me. The simulator also tells you the right aperture for each distance: it comes from the guide number, explained further down.

In real life

Studio portrait: a young woman in a white blouse, hand behind her neck, against a black background. Back to Simulator 1
f/131/160ISO 6485 mmNikon D850

Studio, Fiumicello In the studio the main light was the flash with a softbox: it is what shapes the face.

85 mm f/1.4 · studio flash with softbox

2Simulator

Fill light against the sun

The sun is low behind me and my face is in shadow. Without flash you have to choose: expose for the sky (dark face) or for the face (blown-out sky). Expose for the sky, turn on the flash and set the flash compensation: between −2 and −1 the face brightens without the flash being noticeable.

In real life

Outdoor backlit portrait: the young woman’s face is brightened by the flash, while the background stays bright and blurred. Back to Simulator 2
f/1.41/1250ISO 10085 mmNikon D750

Plessiva Park, Collio Against the light, the on-camera flash brightens the face without blowing out the background. At 1/1250 it was working in high-speed sync (FP).

85 mm f/1.4 · on-camera flash, FP sync

3Simulator

The sync speed depends on the camera

At sunset, with the flash on my face. Choose the camera and change the shutter speed: with a focal-plane shutter, beyond the sync speed part of the photo gets no flash; with a leaf shutter it doesn’t happen. Below you can see the shutter in slow motion.

The sync speed

3 Simulator With flash you can’t use any fast shutter speed you like. Every camera has a sync speed, usually between 1/160 and 1/250 (on my Nikon Z6III it’s 1/200): if you shoot faster, part of the photo gets no flash and a dark band appears.

The reason is the focal-plane shutter of DSLRs and almost all mirrorless cameras: two curtains that travel one behind the other in front of the sensor. At fast speeds the second curtain starts before the first has reached the end, and the flash, being so short, lights only the slit that’s uncovered at that instant. The leaf shutter, made of blades inside the lens like the one in my Ricoh GR IV, uncovers the whole sensor at once and works with flash at any shutter speed.

If you need a speed faster than the sync speed there’s HSS, high-speed sync: the flash emits lots of tiny flashes for the whole travel of the slit and works at any shutter speed, but with much less power. With the electronic shutter, on the other hand, many cameras use the flash only at slow speeds or don’t fire it at all.

How to set it

1 Simulator In TTL the camera fires a pre-flash, measures the light that comes back and decides the power; you correct it with flash compensation, which is separate from exposure compensation. It’s the most convenient mode, especially when the distance changes. In manual you choose the power (1/1, 1/2, 1/4…) and the light stays identical shot after shot: handy when subject and flash stay still.

The guide number tells you how powerful a flash is. Divide the guide number by the distance and you get the right aperture at ISO 100. With a guide number of 32, at 4 metres you need f/8 (32 ÷ 4).

Direct flash from the camera is hard and flat: if you can, bounce it off a ceiling or a light-coloured wall, or soften it with a diffuser. With a slow shutter speed and a moving subject try the second curtain: the flash fires at the end of the exposure instead of at the start, and the motion trail stays behind the subject instead of in front of it.

On your camera

  • High-speed sync: Auto FP on Nikon, HSS on Canon and Sony, FP (HSS) on Fujifilm. With the leaf shutter of the Ricoh GR IV you don’t need it.
  • Second-curtain sync: on Sony it’s called rear sync.

Key points

  • With flash there are two lights: the shutter speed controls the background, the aperture and the power control the subject.
  • Double the distance = a quarter of the light (−2 stops): a nearby subject comes out bright, a distant background falls into darkness.
  • Fill light against the sun: expose for the sky and set flash compensation between −2 and −1.
  • Don’t go faster than the sync speed, usually 1/160–1/250. To go beyond it you need HSS or a camera with a leaf shutter.

Try it yourself

On a sunny day, place a person with the sun behind them. Expose for the sky and shoot without flash, then with the flash at −2, −1 and 0. Compare: at −2 and −1 the face brightens naturally, at 0 you can tell you used flash. If your camera has a focal-plane shutter, also try a shutter speed faster than the sync speed and see what happens at the bottom of the photo.

Post the result and tag me @enrico.marega, or send it to me by DM: I’d love to see how you tackled it.

Quick check

The subject moves from 2 to 4 metres away from the flash. How much light reaches them?
With flash, you want a darker background without changing the subject. What do you adjust?
Portrait with the sun behind the person. How do you set the fill flash?
With a mirrorless camera with a focal-plane shutter you shoot with flash at 1/1000 and part of the photo stays dark. Why?